Now booking Q3 install slots for narrow-web flexo and hybrid label pressrooms — request a planning call

The Printing Industry Has Changed: Why Clinging to 2020 Plays Will Cost You in 2025

2026-11-20· by Adrian Okafor

If you're running a print shop and your emergency plan hasn't changed since 2020, you're gambling with money you don't need to lose.

I coordinate emergency orders for a commercial printer. In the past 12 months, I've handled over 200 rush jobs, including same-day turnarounds for newspaper publishers who found a critical error in a print run 36 hours before delivery. I'm not speaking from theory. I'm speaking from the invoice line items that say "rush fee."

Here's what I've learned: the tools, the timelines, and the expectations in this industry have shifted faster than most shop owners want to admit. The ones who haven't adjusted are paying for it—literally. And honestly, the ones who've adapted aren't necessarily smarter. They just stopped assuming that what worked in 2020 still works now.

Why Goss press history matters more than you think

Goss is a printing press company that's been building newspaper and commercial presses since 1885. That's 140 years of accumulated knowledge. The company's name is on some of the most recognizable newspaper presses ever made, and those presses still show up in service calls today—sometimes decades after installation.

Goss printing press history is full of shifts that a lot of people forget. The company didn't survive 140 years by refusing to change. It survived by reconfiguring, by adapting, by shifting from pure manufacturing into parts, service, and press reconfiguration when the market demanded it. That's not a small detail. That's the whole reason the name is still relevant.

Here's what I see in practice. A lot of shops treat their Goss press as a fixed asset—something installed, maintained, and eventually replaced. But the shops that actually understand the history treat that press as something more flexible. A press installed in 1998 can often be reconfigured for a different run size or substrate. Not always. But often.

I've watched shops overpay by 30-40% on emergency parts because they hadn't updated their vendor list since 2019. Same shop, same press, same deadline—but the vendors they were calling weren't the ones with the best response times anymore. The assumption was that the old list still worked. The reality was that it had gone stale. And here's the thing about stale vendor lists: you don't find out they're stale until you're already in an emergency.

The parts and service landscape has changed—and it's not coming back

Five years ago, if I needed a part for a commercial press fast, the process was pretty linear: call the established distributors, hope they had stock, wait for shipping. There was a pecking order, and you followed it. Today, the picture is different. A well-organized remote vendor can often beat a disorganized local one. That shift happened in logistics across every industry, and printing is no exception.

Here's what I mean. In March 2024, we had a Goss press go down 36 hours before a Sunday run. The part we needed wasn't in any regional warehouse. The "local" option would have taken three days. We found a remote supplier with the part in stock and paid $800 extra in rush shipping. The client's alternative was a $12,000 penalty clause for missing delivery. That math isn't complicated.

What was the actual difference? The remote vendor had a real-time inventory system and answered the phone. The local vendor had a website that hadn't been updated since 2022. That's the landscape now. "Local is faster" isn't a rule anymore. It's a habit. And habits are expensive when the deadline is real.

What consumer printers and 3D printing taught us about "fast"

Here's where it gets interesting—and a little counterintuitive. The baseline for what "fast" even means has moved. And it didn't move because of industrial printing alone.

Take material jetting 3D printers. Five years ago, that was niche technology. Today, it's mainstream enough that prototypes that used to take a week now take a day. That sets a different expectation across manufacturing. When your client sees a rapid prototype delivered in 48 hours, they unconsciously expect your print run to move faster too. They don't say it out loud. But they feel it.

Then there's the consumer side. The HP Sprocket photo printer put instant photo printing in people's pockets. If you've ever wondered "is the HP Envy 5000 an inkjet printer," the answer is yes—but the more important point is what that level of accessibility has done to expectations. Consumers now expect printing to be wireless, immediate, and foolproof. Those expectations don't stay in the consumer world. They come to your counter.

Am I saying a commercial print shop needs to match consumer-grade speed? No. That would be ridiculous. Commercial presses don't work that way, and nobody expects them to. What I'm saying is that the baseline has shifted, and stubbornness about how things "used to work" is costing shops money. The gap between what your client experiences at home and what they experience at your shop is wider than it's ever been.

"But industrial presses aren't the same as consumer printers"

Fair point. A Goss newspaper press and an HP Sprocket are not in the same universe, functionally speaking. But the mindset is the same. The shop that says "we've always used this vendor for parts" is the same shop that struggles to explain to a client why a reprint takes seven days when the client's desktop printer handles 50 pages in two minutes.

People think the disconnect is about capability. Actually, it's about comparison. Clients don't compare your press to their desktop printer. They compare your turnaround time to their last experience. The causation runs the other way: it's not that they expect you to match consumer speed—it's that they expect you to match their last vendor's speed. And if that vendor was faster, you're already behind.

I'm not a logistics expert, so I can't tell you the optimal carrier strategy for every region. What I can tell you, from the perspective of someone who coordinates rush jobs every single week, is this: the shops that stay competitive are the ones that treat every emergency as a test of their process, not a test of their luck.

The fundamentals haven't changed. Industry standard color tolerance is still Delta E < 2 for brand-critical colors. Commercial offset printing still requires 300 DPI at final size. Those standards are stable. But the execution around them? That's moving faster than most shops want to admit.

The takeaway

The printing industry hasn't changed in every way. The fundamentals of press operation, color management, and substrate handling are still what they were. But the speed at which information moves, the options for sourcing parts, and the baseline expectations from clients—those have changed. Dramatically.

If your emergency plan is three years old, it's not a plan. It's a wish. The shops that adapt will keep the work. The shops that don't will keep explaining why they can't deliver on time.

Trust me on this one: the cost of updating your process is negligible compared to the cost of losing a client who's already on the fence.